Patek Philippe Calatrava Replica does not need much introduction. They use flat or slightly rounded bezels, smooth and polished, inlaid with gemstones, or decorated with guilloche patterns, from ultra-thin to more conspicuous, equipped with officer case and smooth dial.
The thickness of the case is 8.43 mm, the measurement between the lugs is 46.9 mm, and the distance between the lugs is 21 mm. As the longer name of this new Copy Patek Philippe Calatrava Ref. 6119 implies, the round bezel is decorated with a guilloche stud pattern called clous de Paris.
This is a rather rough pattern, precisely because of its pyramid-like “roughness”, the exquisite and delicate curves of the new lugs and the simple round face are actually like magic. The dial now uses obus-style hour markers to complement the nail-shaped bezel.
Although we can easily call it an “ultra-thin” construction, the Patek Philippe Replica Watch power reserve has been extended to 65 hours-almost enough to last from Friday night to early Monday morning. Although the operating frequency is quite high at 4 Hz, this is still achieved-for a movement that is only 2.55 mm thick, 4 Hz over 65 hours is impressive.
Working in parallel means more torque, which provides a greater moment of inertia for the balance (10 mg/cm2, which is indeed very high and the highest among all Patek Philippe 4Hz movements.
1:1 Replica Patek Philippe Calatrava 6119 is equipped with a sapphire crystal case back to show off the new movement. Water resistant to 3 bar (equivalent to 30m). The dial is made of brass, and the hands and hour markers are made of 18ct gold to match the case. The strap is an alligator leather strap with large square scales, with “mechanical hand stitching”, with 18ct gold claw buckle.